Something revolutionary in portable water treatment
Village Electronic Water Purifier
 
Specifications
 
Contents:                               120 L container with tap, plate set, controller, power supply, Operator manual
 
Plate assembly weight:        9 kg
 
Power requirements:            DC + 12 V to + 15 V, 15 Amp max
 
Electronics Control:            On start button. Automatically removes chemicals,
                                                cleans and disinfects the water
                                                Turns off and does not process over brackish water
                                                Automatically turns off after (adjustable) preset time
                                                LED to indicate operation
                                                LED indicates if water is too salty for operation
 
Max water conductivity:       1.8 mS/cm at 20˚C (5% seawater salinity) – 12 V
 
Max clay turbidity:                > 2,000 NTU
 
Min final turbidity:                < 1 NTU
 
Pathogen reduction:             Typically < 99.99999%
 
Plate lifetime:                Typically greater than 250,000 litres for water with a turbidity of 200 NTU†, greater for lower turbidity
 
Pre set timer:                        Adjustable according to simple instructions  
 
Weight w/o power supply:    12 kg
 
Simple maintenance:            Rinse plates and container in dirty water, dry and store
 
Models:
REPur VN/M
REPur VN/S
REPur VN/A
REPur VB/G
 
† Provided it is used according to instructions
Specifications subject to change without notice.  
 
Back to Purifier