Something revolutionary in portable water treatment
Village Electronic Water Clarifier
 
Specifications
 
Contents:                             120 L container with tap, plate set, controller, power supply, Operator manual
 
Plate assembly weight:        8 kg
 
Power requirements:            DC + 12 V to + 15 V, 10 Amp max
 
Electronics Control:             On start button.   Automatically adjusts to conductivity
                                                Turns off and does not process over brackish water
                                                Automatically turns off after (adjustable) preset time
                                                Disinfect/Stop button, for initial set up, if required
                                                LED to indicate operation
                                                LED indicates if water is too salty for operation
 
Max water conductivity:      1.7 mS/cm at 20˚C (5% seawater salinity) – 12 V
 
Max clay turbidity:                > 2,000 NTU
 
Min final turbidity:                < 1 NTU
 
Pathogen reduction:            Typically greater than 99.9%
 
Plate lifetime:                        Typically greater than 200,000 litres for water with a turbidity < 200 NTU†
 
Pre set timer:                        Adjustable according to simple instructions  
 
Weight w/o power supply:  12 kg
 
Simple maintenance:           Rinse plates and container in dirty water, dry and store
 
Models:
RECla VN/M
RECla VN/S
 
† Provided it is used according to instructions
Specifications subject to change without notice.  
 
Back to Clarifier