Something revolutionary in portable water treatment
Personal Electronic Water Clarifier
 
Specifications
 
Contents:                                3.5 L container with tap, plate set, controller, power supply, Operator manual
 
Plate assembly weight:         400 gm
 
Power requirements:             DC + 4 V to + 15 V, 2 Amp max
 
Electronics Control:              Operate/Start button, Cleans and Disinfects
                                                Turns off and does not process over brackish water
                                                Automatically turns off after (adjustable) preset time
                                                Disinfect/Stop button, for initial set up, if required
                                                LED to indicate operation
                                                LED indicates if water is too salty for operation
 
Max water conductivity:       3.5 mS/cm at 20˚C (10% seawater salinity) N – 5V; B – 12V
 
Max clay turbidity:                > 2,000 NTU
 
Min final turbidity:                 < 1 NTU
 
Pathogen reduction:            Typically greater than 99.9%
 
Plate lifetime:                  Typically greater than 10,000 litres for water with a turbidity of 200 NTU† (more for lower turbidity)
 
Pre set timer:                        Adjustable according to simple instructions  
 
Weight w/o power supply:    800 grams
 
Simple maintenance:            Rinse plates and container in dirty water, dry and store
 
Models:
RECla PN/M
RECla PN/S
RECla PN/H
RECla PN/A
RECla PB/A
 
† Provided it is used according to instructions
Specifications subject to change without notice.
 
Back to Clarifier