Something revolutionary in portable water treatment
Family Electronic Water Purifier
 
Specifications
 
Contents:                               25 L container with tap, plate set, controller, power supply, Operator manual
 
Plate assembly weight:        1.6 kg
 
Power requirements:            DC + 12 V to + 15 V, 5 Amp max
 
Electronics Control:              On start button. Automatically removes chemicals, cleans and disinfects the water
                                                Turns off and does not process over brackish water
                                                Automatically turns off after (adjustable) preset time
                                                Disinfect/Stop button, for initial set up, if required
                                                LED to indicate operation
                                                LED indicate if water is too salty for operation
 
Max water conductivity:       1.8 mS/cm at 20˚C (5% sea-water salinity) – 12 V
 
Max clay turbidity:                >2,000 NTU
 
Min final turbidity:                < 1 NTU
 
Pathogen reduction:            Typically greater than 99.99999%
 
Plate lifetime:                   Typically greater than 50,000 litres for water with turbidity of 200 NTU†, greater for lower turbidity
 
Pre set timers:                    Adjustable according to simple instructions as required for the chemical pollutant loading, the turbidity and the disinfection required.
 
Weight w/o power supply:    2.1 kg
 
Simple maintenance:            Rinse plates and container in dirty water, dry and store
 
Models:
REPur FN/M
REPur FN/S
REPur FN/A
REPur FB/A
 
† Provided it is used according to instructions
Specifications subject to change without notice.  
 
Back to Purifier